HEPA Filter Vacuums Essential for Lead Paint Removal Under EPA Regulations

New Environmental Protection Agency laws that went into effect in April of 2010 require the by using HEPA vacuums during renovation, repair, and paint work towards pre 1978 homes. The foundations known as RRP affect contractors, property managers, and landlords. The role with the HEPA filter vacuum would be to provide you with the primary ways of cleaning lead based paint the dust and dirt. Since cleanup of lead may be the primary objective, the HEPA vacuum may be the most powerful unit that the contractor and property manager can find. Getting the wrong lead paint vacuum which doesn't complete the task properly will definitely cost never ending hours in re-cleaning project sites, and worst yet, leaving a contaminated job site. Improper cleaning can lead to fines of $37,500.

EPA Renovation, Repair, and Painting (RRP) Rule necessitates the by using equipment using a High Efficiency Particulate Air conditioning filter under two circumstances: "HEPA Vacuum" becomes necessary included in the interior workshop cleaning: 40 CFR 745.85(a)(5)(ii) states that "The firm must clean all objects and surfaces from the workshop and within 2 feet with the workshop from the following manner, cleaning from higher to reduce: 1. Walls. Clean walls starting at the ceiling and dealing to the ground by either vacuuming using a HEPA vacuum or wiping using a damp cloth. 2. Remaining surfaces. Thoroughly vacuum all remaining surfaces and objects from the workshop, including furniture and fixtures, using a HEPA vacuum. The vacuum need to be built with a beater bar when vacuuming rugs." EPA defines a HEPA vacuum at 40 CFR 745.83. "HEPA vacuum means vacuum pressure cleaner that has been made with a high-efficiency particulate air (HEPA) filter as the last filtration stage. A Hepa filtration system is a filter that's effective at capturing particles of 0.3 microns with 99.97% efficiency. The vacuum need to be designed in order that all the air drawn into the machine is expelled over the Hepa filtration system without the environment leaking past it."

The message is see-through. Vacums for lead paint removal need to be purpose designed from the beginning. Adding HEPA filters to vacuums that were not designed for the work will only compound problems. Getting the right vacuum is fully necessary.

One of the major issues with HEPA vacuums may be the rate from which filters clog. Since filters capture 99.7% of dust at.3 microns, filters employ a tough job to try and do. In performing their task, they choke upright with fine the dust and dirt, resulting in the vacuum to stock up and lower the airflow and cleaning power. This may lead to big problems during lead cleanup; the vacuum isn't cleaning properly, plus the operator needs to vary filters in the center of the operation. That is a dangerous slope to go down, because changing filters in mid-job risks introduction of lead dust back in towards job site. Also, one of the major complaints from contractors may be the frequency and value of changing the HEPA filters. One contractor is spending upwards of $400 per month on replacement filters for example machine.

What is anxiety the issue is having a lead paint removal vacuum that has self-cleaning filter technology. Once such technology is HEPA No-Clog¢ gives an automatic cleaning with the filters during operation. This effectively eliminates the frequent changing of filters, contamination with the job site, plus the added costs of selecting the wrong vacuum. Selecting the right tools for EPA RRP compliance is essential for you to get the position done right, avoiding fines, and reducing job site liability.